Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 27.06.2025 09:19

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

One is “what exactly is in a ‘surge protector’ ? ”

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Saepe ut vero explicabo illo hic aspernatur.

In schematic diagrams this is the symbol for a fuse:

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

It seems Mohan does not understand the difference between a comment and an Answer.

Are you already having anal sex?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Barnstars:

the problem then depends on "how fast does the fuse operate?".

SpaceX fires up Super Heavy booster ahead of Starship's 10th test flight (video) - Space

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Here is a simplified AC power diagram.

He then asserts :

What is your most erotic sex story?

But… the neutral is now “floating” because of the 1 ohm resistance.

A fuse is a non-resetable over current circuit protector.

An AC voltage/ current source, and an ac inductive load.

Pokémon Cafes To Serve Incredible-Looking Plate Of Food That Can Mega Evolve Before Your Eyes - Kotaku

He then describes the function of a fuse.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

For this case there are devices called Metal oxide varistors (MOV).

New Hope on Autoimmune Diseases: Sunlight - Newser

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Can the fuse protect the electronic devices from lightning instead of a surge protector.

How do you say "I don't speak Italian yet, but I hope to speak it well one day. It would be a pleasure to learn Italian with you. Would you like to teach me Italian?" in Italian?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

So, the voltage could go up to 500 volts, and the fuse will not open up.

What is lightning?

The European Central Bank is almost guaranteed to cut rates. Here's what could happen next - CNBC

Edit 2024–10.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Does Donald Trump have low self-esteem?

[image of Common-mode choke]

This is where this question deviates from being a 'generic' question, and becomes more specific.

but I think this circuit , shows a few more pieces.

Heavy rains suspend play at US Open, raising the possibility of a Monday finish to the final round - CNN

I post the exact comment here.

It also is a device that limits the change in current flow.

These are simplified answers to the original question, and does not change anything I wrote above.

Jessica Alba sunbathes in tiny bikini while ‘channeling chill’ on wellness getaway - Page Six

what exactly is a ‘surge’ protector?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

2024–10–14 [Omar Gharbi Omar Gharbi ]

eight

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

There are two important concepts here.

At least they know the answer if they wanted it.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

He then describes Rainy Season and Lightning.

Upvotes:

2024–10–10[John johnson John Johnson ]

The third is lightning and “how it gets conducted into a home.”

[old diagram got deleted by accident]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

This is 'the assistant's answer'

The MOV will conduct when the voltage exceeds 50% of line voltage.

One

This is where the MOV conducts again, and dissipated the energy.

so, what happens?

The other is “what does a “fuse” do?”

nine

Because the load is inductive, the current lags the voltage.(by a bit).

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

A circuit breaker is similar, but is resettable.

But it can get overloaded, and no longer works.

a photo is worth a thousand words.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

There are three different concepts here that are getting confused.

At one ohm, the resistor has a maximum of 1 watt power.

First Sentence:

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Now when you have a certain ac resistance, then a current flows in a loop.

The bolt then partially travels down the line to your home.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

(Dc diagram shown, AC is similar).

What does a fuse do?

but this device (an Inductor) … impedes the rapid changes in the current.

This device then solves the entire problem.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

This one hit behind the barn.

These devices are installed between the “hot” and “neutral” and protective ground.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

2024–10–16 [ OO OLAOYE OYEBODE ]